Orange (Translucent) Archives - Rocket City Pinball

Genesis Coin Reject Buttons

Andy Sokol — Mon, 01 Jun 2026 02:27:47 +0000

For Genesis, these 3D coin reject buttons feature a Metropolis-inspired robot bust, printed in a metallic pale bronze. Special thanks to Brad Nally for allowing me to use and modify his robot model for these buttons! Purchase includes a set of two buttons.

Installation is easy; see ‘Installation Instructions’ section below.

**Buyer is responsible to confirm their coin door uses this button type (891-1113-01 button), as some export/reimport games may have had coin doors changed/modified. Any returns/exchanges due to incorrect button styles will be at the buyer’s expense (i.e., shipping and any non-reversible fees will not be refunded).** Contact me if you need the designs on a different type of coin reject button.

The post Genesis Coin Reject Buttons appeared first on Rocket City Pinball.

James Bond Coin Rejects

Andy Sokol — Thu, 26 Feb 2026 02:17:37 +0000

Of course, all Bond fans are familiar with the iconic silhouette film intros, looking down the gun barrel aimed at Bond himself! On these coin reject buttons, the barrel has depth to include the 3-dimensional barrel rifling!

Purchase includes a single button, allowing you to mix & match base colors, or to accommodate an exported game with one to three slots. For GoldenEye, use the Sega/DE style buttons; for modern Bond games, use the Suzo-Happ style. Reach out if you're not sure if your buttons match these designs!

Installation is easy! See installation instructions below.

The post James Bond Coin Rejects appeared first on Rocket City Pinball.

King Kong Coin Reject Buttons

Andy Sokol — Tue, 10 Feb 2026 04:33:18 +0000

These 3D coin reject buttons feature the ancient temple tower complete with shiny gong! The model's details and strategic print patterns give the tower blocks their 'engraved/carved' appearance, like the tower in the game. In a fun reference to the buttons' function, the gong's design shows '25c' (cents) instead of a Kong face. Mid-layer filament changes allow for full color integration on the designs and fuses them together as one single continuous print.

Purchase includes a pair of buttons (or a single button for exported games), colored bulbs where applicable (e.g., purple, red, or warm white for yellow or orange base buttons), and replacement e-clips.

Installation is easy! See installation instructions below.

Many thanks to Basstone18 for this authorized use of his gong tower model!

**Buyer is responsible to confirm their coin door uses this Suzo-Happ button type (replacement for button only in 42-0517 assembly, no housing included), as some export/reimport games may have had coin doors changed/modified.**

The post King Kong Coin Reject Buttons appeared first on Rocket City Pinball.

Simpsons Start Button (Data East)

Andy Sokol — Tue, 14 Oct 2025 21:52:40 +0000

Featuring an atom symbol to represent Homer's place of employment! This button comes with a full kit to replace the non-lighted original start button with this new lighted version; no soldering is required! See Installation Instructions section below for video of kit contents and how to install them.

The post Simpsons Start Button (Data East) appeared first on Rocket City Pinball.

Harry Potter Coin Reject Buttons

Andy Sokol — Tue, 14 Oct 2025 02:54:53 +0000

These 3D coin reject buttons are adorned with a 3D sign for Platform 9-3/4, with an off-white background and black border & text. Default base color is translucent red with sparkle, to replicate the original sign design but also give it that magical touch. Other base colors available too.

Purchase includes a pair of buttons, two colored bulbs where applicable (e.g., red, green, purple), and two replacement e-clips in case yours has the difficult tiny ones. (Reference 2nd video in Installation Instructions section.)

Installation is easy! See installation instructions below.

The post Harry Potter Coin Reject Buttons appeared first on Rocket City Pinball.

Dungeons & Dragons Coin Reject Buttons

Andy Sokol — Mon, 26 May 2025 20:09:19 +0000

These 3D coin reject buttons are adorned with intimidating dragon heads, printed in a special dual-color red & black filament to represent Rath the Relentless.

Installation is easy! See installation instructions below.

The post Dungeons & Dragons Coin Reject Buttons appeared first on Rocket City Pinball.

Iron Man (or Avengers) Coin Reject Buttons

Andy Sokol — Mon, 17 Mar 2025 06:01:13 +0000

Intimidating Iron Man heads stare back at you from these 3D printed coin reject buttons. The buttons are printed using mid-layer filament changes, allowing for full color designs while permanently fusing the design to the button. The eyes are hollow to allow the base color light to shine through!

Ideal for Iron Man, Avengers (2012), or Avengers: Infinity Quest.

Installation is easy! See installation instructions below.

The post Iron Man (or Avengers) Coin Reject Buttons appeared first on Rocket City Pinball.

Austin Powers Coin Reject Buttons

Andy Sokol — Sat, 08 Mar 2025 17:59:45 +0000

UPDATED PICS COMING SOON! These 3D-printed buttons for Stern's Austin Powers feature a groovy 3D flower on a translucent background. Purchase includes a set of two buttons.

Installation is easy; see ‘Installation Instructions’ section below.

The post Austin Powers Coin Reject Buttons appeared first on Rocket City Pinball.

Austin Powers Start Button

Andy Sokol — Fri, 07 Mar 2025 04:28:54 +0000

Groovy, baby! Add a psychedelic 3D flower start button to your Austin Powers -- button includes full lighting kit and housing to replace the unlit OEM button and cover the counterbore in the cabinet. No soldering required! See installation video for kit contents and how to install them. Configure your button however you like with your choice of translucent base and metallic colored flower!

The post Austin Powers Start Button appeared first on Rocket City Pinball.

Dungeons and Dragons: The Tyrant’s Eye Start Button

Andy Sokol — Tue, 07 Jan 2025 03:46:31 +0000

This gorgeous start button features a 3D rendition of the D&D dragon ampersand, atop a translucent base in the color of your choice!

The dragon is printed in your choice stunning dual-color metallic filaments -- they really need to be seen in real life (not in photos) to be truly appreciated, as the shiny sheen of the dragon changes color over its surface and by your viewing angle. Available dual-color dragons are red/black (inspired by Rath the Relentless), green/gold, or orange/gold. Single color sparkling dragons are also available -- and any dragon you choose can be printed on one of thirteen different translucent base colors!

The button itself has a rounded outer edge, and the dragon body is rounded where applicable, to be pleasing to the touch. As usual, the photos just don't do this button justice!

Special thanks to AndresMF for the dragon model which I further modified for improved print quality and fit/function.

The post Dungeons and Dragons: The Tyrant’s Eye Start Button appeared first on Rocket City Pinball.