Silver Archives - Rocket City Pinball

Looney Tunes Start Button

Andy Sokol — Tue, 09 Jul 2024 04:22:42 +0000

This 3D printed start button for Looney Tunes takes full advantage of mid-layer filament changes, to create an old-school film real with translucent light-up 'film', and START in a Looney-Tunes-inspired font!

Button is pre-assembled in a complete housing assembly, which fully replaces the small, recessed start button and covers the counterbore in the cabinet. Installation is easy, though Spooky's installation adds an extra step dealing with wiring. See instructional video below!

The post Looney Tunes Start Button appeared first on Rocket City Pinball.

Bride of Pinbot Coin Reject Buttons

Andy Sokol — Fri, 05 Jul 2024 20:48:55 +0000

Make your coin door look ‘out of this world’ with 3D coin reject buttons! These 3D-printed replacement coin reject buttons for Bride of Pinbot feature featuring a miniature space shuttle orbiter printed in white and black with additional ink accents. The orbiter and button are printed together with mid-print filament changes, so they are permanently fused together.

Your purchase includes:

Two coin reject buttons in your choice of base color
Two matching color slots
Two replacement bulbs for specific base colors (e.g., red, purple) — matching bulbs enhance the buttons’ color
Optional add-on with clear/white or yellow base only: two ‘Fire’ LED bulbs from Comet Pinball for a flickering fiery atmospheric reentry look!

Installation is easy; see ‘Installation Instructions’ section below.

**Buyer is responsible to confirm their coin door uses this button type (27-1037 button with 27-1026-3 slot), as some export/reimport games may have had coin doors changed/modified. Any returns/exchanges due to incorrect button styles will be at the buyer’s expense (i.e., shipping and any non-reversible fees will not be refunded).**

The post Bride of Pinbot Coin Reject Buttons appeared first on Rocket City Pinball.

LightShields for Inserts

Mike Ford — Wed, 28 Sep 2022 22:08:50 +0000

Errant light spilling into inserts from nearby bulbs can be annoying & distracting. 3D-printed LightShields reduce the effect -- install at a nearby screw under the playfield! The base includes two holes for optional fit/positioning, and the shield itself is thin enough to trim off material to provide clearance if necessary. LightShield color may vary but will always be neutral (e.g., gray or black). Sold in packs of 10 for $10.

The post LightShields for Inserts appeared first on Rocket City Pinball.

Matchbox Jeep & Explorer Mounts (for DE Jurassic Park)

Mike Ford — Wed, 28 Sep 2022 22:08:48 +0000

Custom 3D printed mounts for Matchbox Jurassic Park Ford Explorer tour vehicles & Jeeps -- perfectly sized to "drive" along the ramp! Custom mount for each vehicle at each location:
"Upper" mount -- where plastic ramp converts into habitrail. Mount slides/clips onto the end of the plastic ramp, no drilling required!
"Lower" mount -- end of ramp at the left inlane. Mount attaches at the two existing screws holding the ramp protector.

Explorer: $15 each

Jeep: $10 each

Mounts: $15 each

The post Matchbox Jeep & Explorer Mounts (for DE Jurassic Park) appeared first on Rocket City Pinball.

The Object mod for Led Zeppelin

Mike Ford — Wed, 28 Sep 2022 22:08:47 +0000

Notably missing from the Led Zeppelin playfield is 'The Object' from the 'Presence' album. Not anymore!

This 3D printed version stands 4.5" tall, designed with a custom snap-fit mounting system built into its base and the included translucent pop bumper cover. To install: remove old cap, install new cap/mount, snap The Object onto the mount & rotate about its center axis to your preferred orientation.

Translucent bumper cover/mount available in red, orange, yellow, green, blue, or clear/white.0

The post The Object mod for Led Zeppelin appeared first on Rocket City Pinball.

Munsters Coin Reject Buttons

Mike Ford — Wed, 28 Sep 2022 14:16:01 +0000

Munsters owners will recognize the design on these 3D-printed coin reject buttons -- a 3D rendition of a spooky bat flying in front of a silvery moon, inspired by the spinner in the game.

Color suggestions:

Pro - purple, green, blue, yellow, or copper (opaque)
Premium - white/clear or silver (opaque)
LE - red or gold (opaque)

PLEASE NOTE: The price is for ONE button, which allows you to mix & match base colors -- as most games will require TWO. Please be sure to order the correct quantity!

Replaces buttons in 42-0517 assembly.

Installation is easy; see ‘Installation Instructions’ section below.

The post Munsters Coin Reject Buttons appeared first on Rocket City Pinball.