Personally, I don't think the OEM red domes are the optimal color choice in this game, so the Tendrils are available with alternate color domes included, like clear/white, purple, or yellow. Get creative and decide what you like best!

To install, simply peel the backing off the included double-sided tape, place over the dome in your preferred orientation, and press against the dome to stick on.

Pricing: each variation includes tendril vines for ONE dome. Please order your desired quantity.

The post Tendril Vines flasher dome covers for Stranger Things appeared first on Rocket City Pinball.

These highly detailed 3D-printed scenery pieces are designed to replace the protruding, mismatched flasher domes/covers. The castle and house each include a custom coupler which mounts directly in place of the dome; each unit then snugly attaches to its coupler from the front. The units are printed in multiple colors with mid-layer filament changes; windows are attached in post-production and aging effects are added by hand.

Can be purchased individually or as a set.  See it in action in the DIY video under Installation Instructions.

The post Back wall flasher replacements for Dungeons & Dragons appeared first on Rocket City Pinball.

Like Marcus was there looking out for John Wick, Rocket City Pinball is here looking out for John Wick pinball owners, with a greatly improved coin stack flasher mod that address all six of the issues listed above.

There are two versions of the mod -- one includes the lower coin stack plus a black sleeve to hide the hex spacer; the other includes the lower coin stack plus a second coin mount which hides the hex spacer and spotlight boards entirely.

The actual coin(s) included are very high quality replicas of the coins used the in the films. The coins are two-sided with different designs on each side, so the end user can choose which face to display. The lion side is extra shiny due to its smooth background; the woman/shield side is still shiny but less reflective due to ridges in the background.

The lower stack is printed in a rich yellow transparent color, so it lights up per design intent. The extra topped 'leaning' coin mount is printed in a sparkly gold color, since it doesn't require transparency and more closely matches the coin color (only its thin outer edge is visible to the player). Both components include fine ridges along the coin 'edges' and the placement of the coin in the stack is more random for a more realistic look. The upper 'leaning' mount displays the beautiful coin even more prominently and helps visually balance the playfield toys.

Both components are designed for strength, as this game is very prone to airballs. Play testing has demonstrated repeated direct airball strikes with no damage. Rocket City Pinball parts are warrantied 100% -- so in the unlikely event that you do experience airball damage to the printed stack or mount, it will be replaced free of charge.

The post John Wick Coin Stack Upgrade appeared first on Rocket City Pinball.

The highly detailed 3D-printed two-piece set is designed to replace the protruding, mismatched flasher dome. It includes a coupler which mounts directly in place of the dome, and the lighthouse itself, which is designed to snugly attach to the coupler from the front. The lighthouse itself is printed in brick, clear, and black filaments, including multicolor printing on each layer for the window section! The lighthouse fully covers the large hole and sits flush against the back wall, and lights up beautifully during gameplay!

This mod fits all three versions of the game -- Pro, Premium, and LE.  It does not interfere with other aftermarket Quint's Shack mods.

Note: Since a different white lighthouse is also visible in the movie, a white brick variation of this flasher mod has been made available.

The post Amity Lighthouse wall flasher for Jaws appeared first on Rocket City Pinball.

The cactus is growing amongst a base of sedimentary rock -- 3D printed as one continuous piece with mid-layer filament changes. A color-gradient filament is used for the rocks, giving them a natural sedimentary appearance, while the cactus is printed in translucent green.

Cactus flasher includes a green dome cover (for richer green color light) with a strip of double-sided tape pre-installed on its outer surface. Cactus/rocks install right over the dome.

The post Cactus flasher for Cactus Canyon (Original & Remake) appeared first on Rocket City Pinball.

This 6-piece set includes the following components:
- 3D-printed replacement flasher dome
- 3D-printed SPECTRE flasher dome cap
- 3D-printed HexSleeve, in the same color as the flasher cover
- Black washer, lockwasher, and screw
The cap is pressed on with a snug fit from above -- in the orientation of your choice -- after flasher cover installation. (Reference video under Installation Instructions.)

NO ELECTRICAL WORK IS REQUIRED! This mod utilizes the existing lighting setup.

This custom flasher dome replacement is a simple but drastic improvement over the original cover for several reasons:
- it sits higher than the original flasher cover, throwing more light into the curved section of the ramp (which in turn reflects it around)
- its top cap includes a negative space in the shape of the SPECTRE logo, tying in the with logo on the nearby ramps
- SPECTRE logo can be installed in your desired orientation (ref video)
- the additional height of the flasher dome maximizes visibility of the top cap, which would be otherwise be partially obstructed by the hex spacer
- the included HexSleeve and black washers/screw help the silver hex spacer hide & blend into the surrounding area instead of clashing/blocking the flasher dome
- flasher dome can be made in the color of your choice to match features in the game or additional accents you've added

The video below demonstrates some (not all) of the various colors available, to help you choose. It's completely up to you! For those unsure, Rocket City Pinball recommends the following colors:
- Yellow, to match the plastics in the back right area of the playfield
- Red, to match the red throughout the game
- White, to bring out the MI6 lights and white bumper bodies
- LE owners might consider Fluorescent Orange or Turquoise to match the t-molding or powder coating, respectively
https://youtu.be/0GYjU0_14sY

NOTE: This mod will fit all three versions of the game (Pro, Premium, LE).

The post SPECTRE Ramp Flasher Cleanup Mod for James Bond 007 appeared first on Rocket City Pinball.

The 3D-printed two-piece set is designed to replace the protruding, mismatched flasher dome. The replacement cover is produced with two mid-print filament changes, permanently fusing the logo to the cover. The flange is pressed on with a snug fit from the front after flasher cover installation. (Reference video below.)

This custom flasher replacement is a simple but drastic improvement over the original cover for several reasons:
- it matches the styling of the SPECTRE lights -- black border, red background, white outline around black lettering/symbol
- it matches the color of the SPECTRE lights -- red when off, but mango-ish when lit (whereas the original flasher cover lights up bright red)
- it sits nearly flush with the surface instead of weirdly protruding way out there like the original
- it covers up the edge of the hole for a clean, finished look

The post SPECTRE Wall Flasher Cleanup Mod for James Bond 007 (Premium/LE) appeared first on Rocket City Pinball.

Alternate dome colors available to personalize your game -- clear/white, purple, blue, or amber.  Rocket City Pinball recommends blue domes for the lower two, amber for upper right, and keep the OEM red at the upper left location (this location used with Carnage modes).

NOTE:  Early-run Pro games had 'floating' domes with no plastics, while later Pros and Premium/LE had decorative plastics.  Reference picture for details -- the symbiotes are different heights for each configuration, so be sure to order the correct ones!

The post Venom Symbiote flasher covers appeared first on Rocket City Pinball.

This rabbit & hat replaces the flasher dome near the end of the right plastic ramp, near the right inlane.  The rabbit lights up when the flasher fires!

The Presto mod is printed in a single piece (in two colors), and the ears and facial features of the rabbit are added by hand in post-production.

The post Rush Presto Flasher (Rabbit / Hat) appeared first on Rocket City Pinball.

The Signals mod replaces the flasher dome near the S-curve in the right plastic ramp, and includes a 3D-printed hydrant (thanks to angrysquirrel / Mike Smith for the great model which has been further modified to accommodate this mod), a pre-manufactured resin dalmatian model, and a custom-designed 3D-printed mount. The hydrant is printed in translucent red so it lights up when the flasher fires.

Five different mount options are available, since folks have different preferences. See pictures attached to this listing and videos below:

• Grass mount, with a contoured/wavy surface to look more natural, all around the hydrant and under the dog.  This is the best representation of the Signals album cover.
• Silver mount, printed with shiny metallic filament (plastic, not actual metal), to match the metallic features in the game.
• Brass mount, printed with a shiny metallic antique-brass colored filament (plastic, not actual metal), to match the brass/copper colors throughout the game
• Hybrid Silver/Grass mount, with the top level (around the hydrant) in metallic silver, with the lower level (dog platform) in the contoured grass.
• Hybrid Brass/Grass mount, with the top level (around the hydrant) in metallic antique brass, with the lower level (dog platform) in the contoured grass.

The post Rush Signals flasher scene (Dalmatian / Hydrant) appeared first on Rocket City Pinball.