Sega - Rocket City Pinball

GoldenEye Start Button

Andy Sokol — Wed, 27 Sep 2023 00:02:08 +0000

Four different designs are available for GoldenEye start buttons:

the GoldenEye device from the film -- is printed in two separate pieces and press-fit together after printing, so the red/orange section can protrude through the silver disc and light up
a continuation of the yellow/white logo on the cabinet around the button, with 'START' in raised letters
a gun barrel -- with spiraled rifling in the sidewall -- with Bond in silhouette poised with his gun raised
a gun barrel -- with spiraled rifling in the sidewall -- with Bond's silhouette in action shooting back at the villain

The post GoldenEye Start Button appeared first on Rocket City Pinball.

James Bond 007 Start Button (Gun Barrel version)

Andy Sokol — Tue, 26 Sep 2023 17:36:58 +0000

- You expect me to flip?
- No, Mr. Bond -- I expect you to drain!

All Bond fans are familiar with the iconic silhouette film intros looking down the gun barrel aimed at Bond himself! Here are two versions made into start buttons, which have adequate depth to include the 3-dimensional barrel rifling! You could even install a red bulb on the white-base version to simulate the 'blood' running down this villain's first-person view.

The two versions as 'Poised' where Bond stands with his gun raised high, awaiting his target, and 'Action' where Bond has turned to point & shoot at the villain.

The button base, black silhouette, and gun barrel are 3D printed with a mid-print filament change to permanently fuse them all into one continuous piece.

The post James Bond 007 Start Button (Gun Barrel version) appeared first on Rocket City Pinball.

Space Jam Start Button

Andy Sokol — Tue, 26 Sep 2023 02:47:32 +0000

This 3D start button for Space Jam replaces the non-lighted start button with a fully lit one! The design is inspired by TuneSquad logo on the players' shirts. The button is 3D printed in a single run (with FOUR filament changes in the process) so all the colors are fused together.

Includes full kit with all components listed below, needed for the conversion to a lighted button -- takes less than 10 minutes to install with no soldering required!
- 3D start butting with housing & bulb
- Bulb housing with pre-soldered 12" Comet matrix connector
- Custom cabinet bushing to properly align the button
- Comet matrix flex bulb, to tap into power at left coin reject button
- Matching Comet wedge bulb for other coin reject button (so the buttons match in light brightness/color)

The post Space Jam Start Button appeared first on Rocket City Pinball.

Baywatch Start Button

Andy Sokol — Tue, 19 Sep 2023 02:35:19 +0000

This 3D printed button features a rescue-orange life preserver with white wraps, on a translucent light blue to match the cabinet (and to appear as if floating in the water). The button, START in Baywatch-esque font, life preserver, and wraps are printed together with mid-layer filament changes to permanently fuse them all together.

The post Baywatch Start Button appeared first on Rocket City Pinball.

Apollo 13 Start Button

Andy Sokol — Mon, 18 Sep 2023 22:24:38 +0000

This 3D printed button features a beautiful cratered moon on a translucent clear/white base. The moon is printed in a light sparkled gray, and 'START' is written in negative space (so it lights up) in same font as the Apollo 13 logo on the cabinet.

The post Apollo 13 Start Button appeared first on Rocket City Pinball.

X Files Coin Reject Buttons

Mike Ford — Wed, 28 Sep 2022 19:14:29 +0000

The truth is out there! These 3D-printed buttons for Sega's The X Files feature a creepy gray alien with haunting black eyes, printed with mid-layer filament changes to fuse the alien and button together. Purchase includes a set of two buttons.

Installation is easy; see ‘Installation Instructions’ section below.

**Buyer is responsible to confirm their coin door uses this button type (891-1113-01 button), as some export/reimport games may have had coin doors changed/modified. Any returns/exchanges due to incorrect button styles will be at the buyer’s expense (i.e., shipping and any non-reversible fees will not be refunded).**

The post X Files Coin Reject Buttons appeared first on Rocket City Pinball.

GoldenEye (007) Coin Reject Buttons

Mike Ford — Wed, 28 Sep 2022 09:09:02 +0000

Elevate your coin door to the next dimension with 3D Coin Reject Buttons! These 3D-printed replacement coin reject buttons feature the iconic gun-barrel -- complete with rifling -- aimed at the silhouette of our renowned Agent 007! Purchase includes a set of two buttons.

Installation is easy; see ‘Installation Instructions’ section below.

The post GoldenEye (007) Coin Reject Buttons appeared first on Rocket City Pinball.

X Files Launch Button

Mike Ford — Wed, 28 Sep 2022 07:17:37 +0000

Available in Autobot or Decepticon on your choice of translucent color base. Lettering accented with ink on light-colored bases for contrast. Housing assembly and switch included, to fully replace the small, recessed staCreepy gray alien head stares out at you from this large replacement launch button. Duane Barry would not approve.rt button and cover the counterbore.

The post X Files Launch Button appeared first on Rocket City Pinball.

X Files Start Button

Mike Ford — Wed, 28 Sep 2022 07:17:20 +0000

Featuring the iconic warning from the show in an X-Files-esque font. This button comes with a full kit to replace the non-lighted original start button with this new lighted version; no soldering is required! See installation video for kit contents and how to install them.

The post X Files Start Button appeared first on Rocket City Pinball.