Red (Metallic) Archives - Rocket City Pinball

Austin Powers Coin Reject Buttons

Andy Sokol — Sat, 08 Mar 2025 17:59:45 +0000

UPDATED PICS COMING SOON! These 3D-printed buttons for Stern's Austin Powers feature a groovy 3D flower on a translucent background. Purchase includes a set of two buttons.

Installation is easy; see ‘Installation Instructions’ section below.

**Buyer is responsible to confirm their coin door uses this button type (891-1113-01 button), as some export/reimport games may have had coin doors changed/modified. Any returns/exchanges due to incorrect button styles will be at the buyer’s expense (i.e., shipping and any non-reversible fees will not be refunded).**

The post Austin Powers Coin Reject Buttons appeared first on Rocket City Pinball.

Austin Powers Start Button

Andy Sokol — Fri, 07 Mar 2025 04:28:54 +0000

Groovy, baby! Add a psychedelic 3D flower start button to your Austin Powers -- button includes full lighting kit and housing to replace the unlit OEM button and cover the counterbore in the cabinet. No soldering required! See installation video for kit contents and how to install them. Configure your button however you like with your choice of translucent base and metallic colored flower!

The post Austin Powers Start Button appeared first on Rocket City Pinball.

X-Men Start Button (2012 or 2024 Uncanny)

Andy Sokol — Thu, 15 Aug 2024 03:38:07 +0000

Inspired by the X in the middle of the 2012 X-Men playfield, this gorgeous 3D start button is printed in three different colors (with mid-layer filament changes) and is available in five different color combinations:
- translucent yellow base, white edges, metallic blue X (like the 2012 playfield)
- translucent red base, silver edges, metallic purple X (Magneto colors)
- translucent purple base, silver edges, metallic red X (Magneto colors, reversed)
- translucent yellow, white edges, metallic red X (like the Uncanny playfield)
- translucent green, white edges, metallic gold X (to match the Uncanny Pro cabinet)

The white/silver edges of the X are three-dimensionally sloped, and the X itself is 'tubed' to give it a rounded surface for maximal shine and a pleasing rounded touch.
A complete housing assembly is included to fully replace the small, recessed start button for 2012 X-Men. The new assembly covers the counterbore in the cabinet, leaving you with a clean installation of a larger 1.5" start button! (The housing is not required for 2024 Uncanny X-Men.) A bulb of the corresponding color (warm white, red, purple, or green) is provided to richen the base color when lit.

The post X-Men Start Button (2012 or 2024 Uncanny) appeared first on Rocket City Pinball.

Star Trek Start Button (Stern)

Andy Sokol — Tue, 26 Sep 2023 02:57:17 +0000

Boldly going where no Start Button has gone before -- into the 3rd dimension!

This trek-inspired button features a beautiful spherically-curved surface printed in shiny metallic filament, with material strategically omitted to allow the insignia and 'START' to light up in the base color.

Since Star Trek was released before Stern began using the now-standard 1.5" start buttons, this item includes a complete housing assembly to fully replace the small, recessed start button. The new assembly will cover the counterbore in the cabinet, leaving you with a clean installation of a larger 1.5" start button!

Pro & LE suggestions

clear/white base with metallic blue top
blue base with metallic silver top

Premium suggestions

clear/white base with metallic red top
red base with metallic silver top

The post Star Trek Start Button (Stern) appeared first on Rocket City Pinball.

LightShields for Inserts

Mike Ford — Wed, 28 Sep 2022 22:08:50 +0000

Errant light spilling into inserts from nearby bulbs can be annoying & distracting. 3D-printed LightShields reduce the effect -- install at a nearby screw under the playfield! The base includes two holes for optional fit/positioning, and the shield itself is thin enough to trim off material to provide clearance if necessary. LightShield color may vary but will always be neutral (e.g., gray or black). Sold in packs of 10 for $10.

The post LightShields for Inserts appeared first on Rocket City Pinball.

Matchbox Jeep & Explorer Mounts (for DE Jurassic Park)

Mike Ford — Wed, 28 Sep 2022 22:08:48 +0000

Custom 3D printed mounts for Matchbox Jurassic Park Ford Explorer tour vehicles & Jeeps -- perfectly sized to "drive" along the ramp! Custom mount for each vehicle at each location:
"Upper" mount -- where plastic ramp converts into habitrail. Mount slides/clips onto the end of the plastic ramp, no drilling required!
"Lower" mount -- end of ramp at the left inlane. Mount attaches at the two existing screws holding the ramp protector.

Explorer: $15 each

Jeep: $10 each

Mounts: $15 each

The post Matchbox Jeep & Explorer Mounts (for DE Jurassic Park) appeared first on Rocket City Pinball.

The Object mod for Led Zeppelin

Mike Ford — Wed, 28 Sep 2022 22:08:47 +0000

Notably missing from the Led Zeppelin playfield is 'The Object' from the 'Presence' album. Not anymore!

This 3D printed version stands 4.5" tall, designed with a custom snap-fit mounting system built into its base and the included translucent pop bumper cover. To install: remove old cap, install new cap/mount, snap The Object onto the mount & rotate about its center axis to your preferred orientation.

Translucent bumper cover/mount available in red, orange, yellow, green, blue, or clear/white.0

The post The Object mod for Led Zeppelin appeared first on Rocket City Pinball.

Willy Wonka and the Chocolate Factory Coin Reject Buttons

Mike Ford — Wed, 28 Sep 2022 18:50:38 +0000

Invention, my dear friends, is 93% perspiration, 6% electricity, 4% evaporation, and 2% butterscotch ripple.

These 3D-printed coin reject buttons for Willy Wonka & The Chocolate Factory feature a rich brown chocolate bar and a Wonka-inspired W emblem.

Customize the base & W colors to your preference! Can't decide? Here are some color suggestions:

Standard Edition - yellow base, metallic purple W
Limited Edition - blue base, metallic purple W
Collector's Edition - yellow base, metallic red W

One creative customer even ordered clear ones and installed color-changing RGB lights behind them!

Your purchase includes a set of two coin reject buttons. Replaces buttons in 42-0517 assembly.

Installation is easy; see ‘Installation Instructions’ section below.

The post Willy Wonka and the Chocolate Factory Coin Reject Buttons appeared first on Rocket City Pinball.

Transformers Coin Reject Buttons

Mike Ford — Wed, 28 Sep 2022 15:33:21 +0000

Transform your coin door with these 3D-printed replacement coin reject buttons, configurable in Autobot or Decepticon colors schemes!

Your purchase includes one coin reject button in your choice of base color and design -- purchasing them individually allows you to mix & match designs.

Replaces button in 42-0517 assembly.

Installation is easy; see ‘Installation Instructions’ section below.

The post Transformers Coin Reject Buttons appeared first on Rocket City Pinball.

X Files Launch Button

Mike Ford — Wed, 28 Sep 2022 07:17:37 +0000

Available in Autobot or Decepticon on your choice of translucent color base. Lettering accented with ink on light-colored bases for contrast. Housing assembly and switch included, to fully replace the small, recessed staCreepy gray alien head stares out at you from this large replacement launch button. Duane Barry would not approve.rt button and cover the counterbore.

The post X Files Launch Button appeared first on Rocket City Pinball.