As usual, there's a little personal taste involved, so Rocket City Pinball's Pokemon Colored Post Cleanup Kit comes in two variations:
- Complete kit: RCP's recommended colored posts & Pokeposts, green lane guides, black post for back wall, and enough extra Pokeposts to replace any of the other colors (if you decide you like the Pokepost better during installation)
- Pokeposts-only kit: Full set of Pokeposts (i.e., none of the other colors), plus green lane guides, and black post for back wall

The photos attached to this listing indicate the recommended locations & colors. No further installation guide is available; any disassembly required for access is to be determined by the end user.

Special thanks to Pin-Tweak for volunteering to help test the installation! More photos coming soon.

The post Pokemon Colored Post Kit appeared first on Rocket City Pinball.

Developed with racing games in mind, these Checkered Posts posts are printed using mid-layer filament changes. Note: while the checkered pattern is most well-defined on the 'front' and 'rear' faces of the posts, the 'sides' of the posts don't exhibit a perfect pattern -- this is simply due to the round geometry of the posts, and the inability of straight lines to cleanly follow a curved surface. Posts usually support decorative plastics and thereby their full circumference isn't visible -- so during installation, simply orient the posts with the clean checkered pattern facing outward.

You can also get creative with these in your own custom color combination.  I have over 75 colors in stock — including metallic and sparkly ones — so I will use your game and color description to help select the ideal material colors.  Simply fill in the fields below!

Upon review of your selections/descriptions, and review of available color inventory, you will be contacted with a picture/preview of the suggested color(s) for your approval prior to production.

Rocket City Pinball's posts are printed in PLA with 50% infill for exceptional strength.  Thousands of RCP posts are in service in customers' games and there has never been a report of a damaged or broken post.

The post Checkered Posts appeared first on Rocket City Pinball.

Upon review of your selections/descriptions, and review of available color inventory, you will be contacted with a picture/preview of the suggested color(s) for your approval prior to production.

These Crosshatch Posts posts were created for the game Ready...Aim...Fire! to match the playfield's background pattern. These wild looking posts are printed using mid-layer filament changes. Note: while the crosshatch pattern is visible on the 'front' and 'rear' faces of the posts, the 'sides' of the posts don't show a perfect crosshatch pattern -- this is simply due to the round geometry of the posts, and the inability of straight lines to cleanly follow a curved surface. Posts usually support decorative plastics and thereby their full circumference isn't visible -- so during installation, simply orient the posts with the clean crosshatch pattern facing outward.

Rocket City Pinball's posts are printed in PLA with 50% infill for exceptional strength.  Thousands of RCP posts are in service in customers' games and there has never been a report of a damaged or broken post.

The post Crosshatch Posts appeared first on Rocket City Pinball.

With over 75 colors in stock — including metallic and sparkly ones — I will use your game and color description to help select the ideal material colors.  Simply fill in the fields below!

To order:

1. Determine the number of posts you need.
2. Choose the correct height(s) of the posts you need.  Most older games have 1" or 1-1/8" posts (or combination of both); 1990s & up typically have 1-1/16".
3. Choose your preferred finish / filament type
4. Enter the game name in the field provided
5. Enter your color choice(s) / description(s) in the field provided

Upon review of your selections/descriptions, and review of available color inventory, you will be contacted with a picture/preview of the suggested color(s) for your approval prior to production.

Rocket City Pinball's posts are printed in PLA with 50% infill for exceptional strength.  Thousands of RCP posts are in service in customers' games and there has never been a report of a damaged or broken post.

The post Conjoined “Siamese” Double Posts appeared first on Rocket City Pinball.

Upon review of your selections/descriptions, and review of available color inventory, you will be contacted with a picture/preview of the suggested color(s) for your approval prior to production.

Rocket City Pinball's posts are printed in PLA with 50% infill for exceptional strength.  Thousands of RCP posts are in service in customers' games and there has never been a report of a damaged or broken post.

The post Stoplight Posts appeared first on Rocket City Pinball.

Rocket City Pinball's posts are printed in PLA with 50% infill for exceptional strength.  Thousands of RCP posts are in service in customers' games and there has never been a report of a damaged or broken post.

The post Patriot Posts appeared first on Rocket City Pinball.

Rocket City Pinball has designed a custom 3D model post and refined the specific print parameters to maximize its smoothness and shine.  Metallic colored posts look like color-anodized metal.

To order:

1. Determine the number of posts you need.
2. Choose the correct height(s) of the posts you need.  Most older games have 1" or 1-1/8" posts (or combination of both); 1990s & up typically have 1-1/16".
3. Choose the correct diameter of the posts you need.  Most games (old and new) use #6 screws for the posts, but 1990s Bally/Williams games and current JJP games use #8 screws so their posts have larger hole diameters.
4. Choose your preferred finish / filament type
5. Enter the game name in the field provided
6. Enter your color choice(s) / description(s) in the field provided

Upon review of your selections/descriptions, and review of available color inventory (I have over 75 colors in stock with others just a few clicks away), you will be contacted with a picture/preview of the suggested color(s) for your approval prior to production.

Rocket City Pinball's posts are printed in PLA with 50% infill for exceptional strength.  Thousands of RCP posts are in service in customers' games and there has never been a report of a damaged or broken post.

The post Single Colored Posts appeared first on Rocket City Pinball.

Upon review of your selections/descriptions, and review of available color inventory, you will be contacted with a picture/preview of the suggested color(s) for your approval prior to production.

Rocket City Pinball's posts are printed in PLA with 50% infill for exceptional strength.  Thousands of RCP posts are in service in customers' games and there has never been a report of a damaged or broken post.

The post Tri-Color Stack Posts appeared first on Rocket City Pinball.

Please identify your game and your desired stripe colors in the fields below, from bottom to top.  I have over 75 colors in stock -- including metallic and sparkly ones -- so I will use your game and color description to help select the ideal material colors.

To properly describe your color patter, for example, from the photos in this listing:

• the rainbow ones are 1) purple 2) blue 3) green 4) yellow 5) orange 6) red
• the fiery colored ones are 1) red 2) orange 3) yellow 4) yellow 5) orange 6) red
• the caution-striped ones are 1) yellow 2) black 3) yellow 4) black 5) yellow 6) black

Upon review of your selections/descriptions, and review of available color inventory, you will be contacted with a picture/preview of the suggested color(s) for your approval prior to production.

Rocket City Pinball's posts are printed in PLA with 50% infill for exceptional strength.  Thousands of RCP posts are in service in customers' games and there has never been a report of a damaged or broken post.

The post Candy Stripe Posts (Custom Colors) appeared first on Rocket City Pinball.

Note: Wizard of Oz has skinny posts, but the larger footprint on these posts are often used to cover/resolve chipped clearcoat/paint issues.  The change to rubber geometry (due to larger diameter post neck) is minimal, and has not been reported to affect gameplay.

Rocket City Pinball's posts are printed in PLA with 50% infill for exceptional strength.  Thousands of RCP posts are in service in customers' games and there has never been a report of a damaged or broken post.

The post Rainbow Posts appeared first on Rocket City Pinball.