Are you finding white shavings in the right orbit of your James Bond 007 Premium or LE?  White shavings in the right orbit are indicative of your jetpack up-post pin rubbing against the edge of the metal as it rises up through the ramp.  This pin is very long and has no significant lateral support aside from the coil sleeve and has a LOT of slop in where it comes to rest, allowing it to scrape against the metal as it rises, “shaving” it and dropping the shavings down into the orbit below.

With Rocket City Pinball’s Jetpack Pin Alignment Corrector, the pin will be more closely aligned with the hole to eliminate/minimize contact against the metal edge, preventing shaving/damaging the pin surface. The Jetpack Pin Alignment Corrector mounts at an OEM screw location on the outside of the ramp. It is 3D printed in yellow (to match the color scheme of the Dr. No area in that corner) and includes a gold screw, washer, and lock washer (which replace the original).

Installation is very easy and should only take 10-15 minutes. The only tools you need are a 1/4″ nut driver, Phillips-head screwdriver, and a ~24″ prop (e.g., 2×4) or playfield jacks to lift back end of playfield clear of side rails.