The silver screws, washers, and nuts totally clash with the copper/bronze/gold colors on the plastics — so I’ve sourced gold-colored hardware to replace them! I’ve meticulously gone through each of the different size and length fasteners that I think should be changed (generally anything in/near artwork/plastics that is bronze/copper/gold in color). Most parts will be an exact swap in size/length; the few exceptions (e.g., those changing to a different length, type, or not to be changed at all) will be noted in accompanying documentation.

The full kit includes over 245 parts, including:

• All the gold colored hardware needed to replace screws, nuts, & washers in visible, accessible areas where the factory hardware doesn’t match the art/surroundings
• 23 HexSleeves (colored sleeves, 3D printed in antique brass color, which slide over existing hex spacers) pre-sized to the proper lengths
• 20 cylindrical spacers (3D printed in antique brass color)
• Super Jackpot sign bulb housing
• 5 anti-ball-trap large posts (3D printed in antique brass color)
• OPTIONAL: 20 skinny playfield posts (3D printed in antique brass color) to replace the OEM clear posts
• a nice organizer box shown in the photos!

See installation notes/tips at the link in the Installation Instructions section.

NOTE: Nylon color in lock nuts may vary in color.

As with all RCP mods, the user accepts all risks inherent with installation & use of these products. Some owners are very concerned about clearcoat — if you remove an OEM posts, there is a risk of some clearcoat chipping off if the posts were installed before the clearcoat was fully cured. You are installing this product of your own freewill (Rush pun intended), so you are accepting this risk.